MOPAR A833 4-SPEED TRANSMISSION & COMPONENT SPECIALISTS

Original extension (tailshaft) housing bolt and washer set, bolts have been cleaned and black oxided, washers included. Fits all A833 4-speeds.

Extension housing casting number C-99539 (with dual shifter pads, BOTH GOOD) for 1970-up B/E-body (also used on Dodge truck A833 overdrive 1976-1987) 18/23 spline input transmissions with 30 spline output/308 bearing. Baked and shot blasted. Uses SR229 bearing snap ring, NOT INCLUDED. (See EH539RO for extension housing, for use on E-body rear shifter location ONLY, $179.95)

Extension housing casting number C-99539 (with dual shifter pads, BUT ONLY MACHINED ON FRONT SHIFTER LOCATION) for 1970-up B-body 18/23 spline input transmissions with 30 spline output/308 bearing (also used on Dodge truck & Van with A833 overdrive 1976-1987) . Uses SR229 bearing snap ring, NOT INCLUDED. Baked and shot blasted. As available.

Extension housing casting number C-99539 (with dual shifter pads, BUT ONLY USEABLE ON REAR SHIFTER LOCATION) for 1970-up E-body 18/23 spline input transmissions with 30 spline output/308 bearing. Uses SR229 bearing snap ring, NOT INCLUDED. Baked and shot blasted. As available.

Extension housing casting number C-99621 for late 1969/early 1970 B-body 18/23 spline input transmissions (2 pads for transmission mount) with 30 spline output/308 bearing. Use EH621 for 1970 application (front pad machined/tapped) and EH621R for 1969 application (rear pad machined/tapped) Baked and bead blasted.

Tailshaft bushing driver kit, for all 26/30 spline A833 4-speeds and all 904-727 Torqueflite automatic transmissions. Includes 2 each removal/installer drivers, and drive handle. Individual kits for either 26/30 spline available.

Vent baffle for all 1966 and later A833 4-speed transmissions. Good used original.

New tailshaft vent assembly, for all 1966-up A833 4-speed transmissions.