MOPAR A833 4-SPEED TRANSMISSION & COMPONENT SPECIALISTS

Extension housing casting number C-99126 for 1969-71 A-body transmissions with 30 spline output/307 bearing. Baked and shot blasted.

Extension housing casting number C-99127 for 1969 B-body transmissions with 30 spline output/307 bearing. Baked and bead blasted.

Extension housing casting number C-99128 for 1969 B-body 18 spline transmissions with 30 spline output/308 bearing. Baked and bead blasted.

Extension housing casting number C-13212 for 1971-up A-body transmissions with 30 spline output/307 bearing. Baked and bead blasted.

Aluminum extension housing casting number C-13212-2 for A-body transmissions with 30 spline output/307 bearing. Baked and bead blasted.

Aluminum extension housing casting number C-13305 for A-body transmissions with 30 spline output/307 bearing. Baked and bead blasted.

Aluminum extension housing casting number C-13386/C-13364 A for A-body overdrive (only)transmissions with 26 spline output/307 bearing. Baked and bead blasted.

Extension housing casting number C-97477 for 1967-68 A-body transmissions with 30 spline output/307 bearing. Baked and bead blasted.

Extension housing casting number C-99539 (with dual shifter pads, BOTH GOOD) for 1970-up B/E-body (also used on Dodge truck A833 overdrive 1976-1987) 18/23 spline input transmissions with 30 spline output/308 bearing. Baked and shot blasted. Uses SR229 bearing snap ring, NOT INCLUDED. (See EH539RO for extension housing, for use on E-body rear shifter location ONLY, $179.95)

Extension housing casting number C-99539 (with dual shifter pads, BUT ONLY MACHINED ON FRONT SHIFTER LOCATION) for 1970-up B-body 18/23 spline input transmissions with 30 spline output/308 bearing (also used on Dodge truck & Van with A833 overdrive 1976-1987) . Uses SR229 bearing snap ring, NOT INCLUDED. Baked and shot blasted. As available.

Extension housing casting number C-99539 (with dual shifter pads, BUT ONLY USEABLE ON REAR SHIFTER LOCATION) for 1970-up E-body 18/23 spline input transmissions with 30 spline output/308 bearing. Uses SR229 bearing snap ring, NOT INCLUDED. Baked and shot blasted. As available.

Extension housing casting number C-99621 for late 1969/early 1970 B-body 18/23 spline input transmissions (2 pads for transmission mount) with 30 spline output/308 bearing. Use EH621 for 1970 application (front pad machined/tapped) and EH621R for 1969 application (rear pad machined/tapped) Baked and bead blasted.

Extension housing casting number C-97623 for 1968 B-body 18 spline transmissions with 30 spline output/308 bearing. Baked and bead blasted.

Extension housing casting number C-95638 for 1964-65 C-body transmissions with companion flange output. Wider transmission mount pad than similar B-body extension. Baked and bead blasted.

Extension housing casting number C-95658 for 1964-65 A-body transmissions with compainion flange output. Baked and bead blasted.

Extension housing casting number C-96706 for 1966-67 A-body transmissions with 26 spline output/207 bearing. Baked and bead blasted.

Extension housing casting number C-96707 for 1966-68 B-body transmissions with 30 spline output/307 bearing. Baked and bead blasted.

Extension housing casting number C-95919 for 1964-65 B-body transmissions with companion flange output. Baked and bead blasted.

Reverse detent housing base gasket, 1.150" outside/.875" inside diameters. 1 per transmission.

Premium bearing retainer gasket for all A883 4-speeds with #307 front bearing. This gasket is manufactured exclusively for Brewer�s Performance with a high performance matrix material, providing excellent flexibility, low flange pressure sealing, good bolt torque retention and reduced fluid wicking. Continuous temperature rated to 400 degrees Fahrenheit. This material DOES NOT require the use of ANY additional sealants. The use of additional sealants can cause the gaskets to squirm while torquing, thus resulting in a torn or damaged gasket!