MOPAR A833 4-SPEED TRANSMISSION & COMPONENT SPECIALISTS

NOS 3410407 WT294-8E cluster gear for 1971-72 18 spline transmissions, 2.44 low gear ratio. Tooth count 26-23-20-17R-16. Limited supply!

Nice used 3410407 WT294-8E cluster gear for 1971-72 18 spline transmissions, 2.44 low gear ratio. Tooth count 26-23-20-17R-16.

NOS cluster gear for 1971-75 23 spline transmissions, 2.47 low gear ratio. Tooth count 30-26-23-17R-17. Reference 3410412 WT294-8D

Good used/reconditioned cluster gear for 1971-75 23 spline transmissions, 2.47 low gear ratio. Tooth count 30-26-23-17R-17. Reference 3410412 WT294-8D

New cluster gear for 1965-70 18 spline transmissions, 2.65 low gear ratio. Tooth count 27-24-20-17R-16. Reference 2801109 WT294-8C

New cluster gear for 1964-70 23 spline transmissions, 2.66 low gear ratio. Tooth count 31-27-23-17R-17. Reference 2464011 WT294-8

Reconditioned cluster gear for 1977-up overdrive transmissions with 3.09 low gear ratio. Tooth count 33-37-27-17R-17. Pictured is version with 2 rings on cluster/1st gear. Reference 3878432 T833-8G

Reconditioned cluster gear for 1964-65 A-body and some eary 70's 23 spline transmissions with 3.09 low gear ratio. Tooth count 33-29-25-17R-17. Reference 2464658 WT294-8A

NOS (take out) cluster gear for "red stripe" Direct Connection 18 spline transmissions, 2.65 low gear ratio. Tooth count 27-26-22-17R-16.

Countershaft/reverse shaft woodruff keys, pair.

Brake/clutch pedal plastic bushing .750" inside diameter .820" outside diameter. Fits Dodge D series truck/van 1959-1993, replaces OE Chrysler part number 1799558, 4294639. Two required per pedal, sold each.

New countershaft for all 18 and 23 spline 4-speed transmissions 1964 to 1975. 10.570" long, Will not work in overdrive transmissions (see our CS-833 for overdrive). Reference 2464012 WT294-3

Good used countershaft for all overdrive transmissions 10.420" (see our CS-294 for 4-speed). Reference 4028123 T833-3A

Countershaft plug for all A833 overdrive transmissions. 1 per transmission.

Countershaft roller spacer 5 5/8" long, installs in center of cluster gear. Good used.

Countershaft spacer/washers, installs between each set of cluster gear rollers. Set/4.

Countershaft arbor tool for all A833 transmissions, correct diameter and exact length to hold rollers and thrust washers in place when installing cluster gear assembly in main case, made with DOM seamless tubing. (Same function as Miller tool C-3938).

New countershaft for all 1962 to 1964 Borg Warner T85 3-speed, and 1963 T10 4-speed transmissions.

Countershaft thrust washer, all A833 4-speed/overdrive transmissions, bi-metal. Available in .058" (standard) .065" or .068" thicknesses. Two required, sold each.

Aluminum extension housing Direct Connection P3571028 for A-body transmissions with 30 spline output/307 bearing. NOS