MOPAR A833 4-SPEED TRANSMISSION & COMPONENT SPECIALISTS

NOS Mopar 2464659 27 tooth third gear for 1964-65 A-body and some early 70's 23 spline transmissions with 3.09 ratio low gear. One identification groove on tips of teeth. Reference WT294-11A

Reconditioned 27 tooth third gear for 1964-65 A-body and some early 70's 23 spline transmissions with 3.09 ratio low gear. One identification groove on tips of teeth. Reference 2464659 WT294-11A

Tailshaft roller bearing for all 1964-5 A833 4-speed transmissions with companion flange/ball & trunion style driveshafts. Also fits 1962-64 727 Torquefilte automatics, and some 1965-91 NP435 truck transmissions. Replaces original Mopar part number 1672194. Correct 1.23" ID, 2.44" OD, and .628" thick.

Transmission tailshaft/mainshaft bearing #207, 2.835" outside diameter and 1.378" inside diameter, used in A-body tailshaft housing with casting number C97706.

Transmission input & tailshaft/mainshaft bearing #307, 3.150" outside diameter 1.378" inside diameter, .825" thick, used in most 1964-1975 4-speeds. Used in tailshaft housings with casting numbers 13305 13212 13386 C95638 C95658 C95919 C96707 C97477 C99126 C99127. Sold each.

Front bearing oil slinger/spacer. Goes between front bearing/input shaft on 1964 and most 1965 A/B A833 transmissions. Only used if originally on your input.

Transmission input & tailshaft/mainshaft bearing #308SG8, 3.543" outside diameter 1.378" inside diameter, .825" thick, used in 1968-1972 18 splines, 1970-74 big block 23 splines, tailshaft housings with casting numbers C97623 C99128 C99539 and C99621. Sold each.

Reconditioned 10.5" big block bellhousing to fit 1963 B-body T10/Borg-Warner 4-speed application. Cast # 2406293, use with 130 tooth flywheel. Bellhousings are cleaned, checked for cracks, damaged threads repaired, bead blasted and primed, ready to paint.

Backup lights/reverse lamp wiring harness, fits 1968-70 B-body and 1968-72 A-body 4-speed applications. Can be modified for use on 1964-67 models. Add a pair of SCC side cover clips and one SCC-B bellhousing clip for proper routing on side cover & bellhousing for $18.90/set.

Backup lights/reverse lamp wiring harness, fits 1970 & up E-body and 1971-74 B-body 4-speed applications. Add a pair of SCC side cover clips and one SCC-B bellhousing clip for proper routing on side cover & bellhousing for $18.90/set.

New backup light switch fits all 1964 & later A833 4-speed/overdrive transmissions. Also fits the heavy duty A230 3-speed transmissions.

Original front bearing retainer bolt set, bolts have been cleaned and black oxided. Fits all A833 4-speeds.

Original extension (tailshaft) housing bolt and washer set, bolts have been cleaned and black oxided, washers included. Fits all A833 4-speeds.

New side cover bolt and washer set. Fits all 1967 and later A833 4-speeds, with one longer shoulder bolt in rear center location, and recess in the main case.

Original side cover bolt and washer set, bolts have been cleaned, new washers included. Fits all 1981 and later A833 4-speed overdrive with aluminum case/side cover, bolts longer than standard A833 transmissions.

New side cover bolt and washer set. Fits all 1964-66 A833 4-speeds.

Billet steel bearing retainer 4.16" bolt circle, 23 spline transmissions with 308 front bearing and 5.125" outside diameter. Use with overdrive bell housings with casting numbers 3743643 3743859 4202506 4202507, replaces cast # C13157 original retainers. Gasket and seal included.

Reconditioned bearing retainer for 23 spline 4-speed overdrives, cast C13157 5.125" diameter, 4.16" bolt circle, 308 bearing. Includes gasket & pinion seal. See part number BR-157B for Billet retainer. See part numbers BR-796C, BR-619C, BR-621C BR-696 for new cast replacement retainers for other popular applications.

Billet steel bearing retainer for 1966-67 18 spline transmissions with 307 front bearing, 4.354" outside diameter, 3.70" bolt circle, replaces cast #2538197 original retainer. Gasket and seal included.

Billet steel bearing retainer for 18 spline transmissions with 307 front bearing, 4.805" outside diameter, 3.70" bolt circle. Gasket and seal included.