MOPAR A833 4-SPEED TRANSMISSION & COMPONENT SPECIALISTS

Torque shaft, fits all 1967-1976 A-body slant six applications. 8" tube length, good used. Reference Chrysler part number 2950251

Torque shaft, fits all 1967-1976 A-body small block V8 applications with 10.5" bellhousing. 7" tube length. Reference Chrysler part number 2950238

Torque shaft, fits 1967-1969 A-body big block applications with stock 10.5" bellhousing (will also work in 1970-1976 A-body big block cars with 10.5" bellhousings). Will NOT work with TTI headers. See TS252KIT for complete torque shaft kit.

Complete torque shaft kit for 1967-69 A-body big block cars with stock 10.5" bellhousings (will also work in any 1970-76 A body big block conversion). Includes (1) TS252 torque shaft (1) BSS481 spacer (2) HC916 bolts (1) BSB271 bellhousing ballstud/bracket (1) CSK parts kit (1) BS766F frame ballstud (1) BSW ballstud washer, and (1) BSN nut. Will NOT work with TTI headers.

Torque shaft, fits all 1962-1965 B-body V8 applications with 10.5" bellhousing.

Torque shaft, fits 1965-1968 C-body V8 applications.

Torque shaft, 1972-79 truck applications, reconditioned, as available.

Torque shaft fits 1963-1966 A-body applications when converting to 1968 & later 10.5" bellhousings. Requires use of our BSB636 bellhousing ballstud bracket, AK636 adjusting rod kit, FP484 fork pivot, and CF702 clutch fork..

Reconditioned torque shaft fits 1964-1966 A-body 273 applications with 9.5" bellhousing cast #2465523, using our bell housing ball bracket BSB478. 7.5" long tube replaced with heavy wall tubing, pins replaced as needed, as available.

Torque Shaft, fits big block 1970-1971 E-body/1971-4 B-body applications with 10.5" bellhousing (can also be used in 1972-4 cars when converting to big block). (WILL NOT FIT WITH 11" CAST IRON OR LAKEWOOD BELLHOUSINGS!, use TS914 and AK449) 9" tube length, lower offset adjuster arm welded 3/4" from end of tube, uses our AK450 adjusting rod kit.

Torque Shaft, fits big or small block 1966-79 B-body, small block 1970-74 E-body & 1971-74 B-body applications. Also works in 1970 & later B/E-body cars when using earlier 11" cast iron or Lakewood bellhousing (tube usually needs shortened on bellhousing end with Lakewood bellhousing) & 1975-9 Chrysler Cordoba, 1975-8 Plymouth Sport Fury, 1977-8 Dodge Monaco, 1978-9 Dodge Magnum & 1979 Chrysler 300, 9" tube length, lower offset adjuster arm welded 1 1/4" from end of tube, uses our AK449 adjusting rod kit. Reference OE part numbers 2534 538 and 2950 914

Torque shaft, 1980-87 truck applications, reconditioned, as available.

Torque shaft replacement pin, to replace damaged or worn pins on all torque shafts, also used on clutch pedal. Heat treated, welding required. Sold each.